Dyeing Ash Body

Need to know how to setup your guitar? How do you lower your action? How do you get rid of the Milli Vanilli stickers? Look here first.
Post Reply
Jayroc1
newbie
Posts: 3
Joined: July 28th, 2017, 6:54 am

Dyeing Ash Body

Post by Jayroc1 » December 14th, 2017, 9:29 am

What are the steps to filling and dying an Ash guitar body?

I'm looking to use Timbermate to ecentuate the grain and then using Keda red dye to make it pop. Do i just seal it with spray lacquer and sand in between coats to get a smooth finish?

Any tips are appreciated!

Musicus
newbie
Posts: 22
Joined: November 22nd, 2017, 10:52 am
Location: Nashville TN

Re: Dyeing Ash Body

Post by Musicus » December 14th, 2017, 2:52 pm

Yes, it needs sealer coats, after the Keda stain. Usually wet sanding, many coats, but follow the instructions on the sealer label. Keda should be the one to recommend a sealer.https://www.kedadyeinc.com/application/

Post Reply